Build a ROV: A Virtual STEM Workshop

Dates: Offered virtually,  January 6, 13, 20, 27, February 3 & 10, 2022


Are you interested in bringing underwater robotics into your teaching environment, but wanted a bit of direction first?  If so, join us for this virtual workshop consisting of 6 weekly sessions of 2 hours each.  Through guided instruction, you will build a MATE Angelfish ROV from the circuit board up so that by the last session, you’ll have a working ROV to share with your students!  You’ll explore the skills and concepts behind the ROV's electronics, waterproofing, tether construction, motor integration, and frame design during weekly discussions and group and individual practice.

Sessions will take place Thursday afternoons from 4 to 6 p.m. CST, from January 6 through February 10, 2022.   You can expect to spend a few hours working outside of these sessions to complete some construction phases. Prior to the workshop, you will need to have an Angelfish ROV kit (purchased from the SeaMate store).*  

You will also need to have a few tools on hand (heat gun/blow dryer, wire cutter/stripper/crimper, ruler, scissors, Phillips and flathead screwdrivers, PVC cutter, multimeter; a jeweler's set of screwdrivers may also be helpful).

Cost: $50 registration fee plus ROV Angelfish* kit and tools

Please email or call (251) 861-2141 x7515 with any questions.

*A pufferfish kit may be substituted but will require an additional session and/or additional time outside of the scheduled sessions for completion of the control box. In addition, a soldering iron and solder will be needed.

Get Our Newsletter